The myDatalogEASY IoTmini is a compact device for measuring, recording and transferring data in the field. The overall solution reduces the complexity of the measurement and control system in the field. There are various mounting options for mounting the device – wall, pipe or DIN rail mounting.
The “4-channel data logger” application for configuring the settings is pre-installed as standard; Further applications are available and customised programming is possible in the studio;
The myDatalogEASY IoTmini is available with different supply options. In addition to battery and accumulator operation, supply via a solar panel is possible for self-sufficient operation of the solution. By means of MPP (Maximum Power Point) tracker, the ideal operating point of the PV module is determined regardless of the size of the solar panel used. This means that the optimum charging power is always achieved. For applications with existing infrastructure, there is a power supply variant. For this, an alternative version of the cover is required.
The myDatalogEASY IoTmini is available with different supply options. In addition to battery and accumulator operation, supply via a solar panel is possible for self-sufficient operation of the solution. By means of MPP (Maximum Power Point) tracker, the ideal operating point of the PV module is determined regardless of the size of the solar panel used. This means that the optimum charging power is always achieved. For applications with existing infrastructure, there is a power supply variant. For this, an alternative version of the cover is required.
The myDatalogEASY IoTmini can supply sensors with 5-24V. In addition, two switchable 3.3V sensor supplies are available.
The myDatalogEASY IoTmini calculates the exact battery/accumulator state of charge using the coulomb method. This is particularly relevant for self-sufficient applications in the field and gives a good feeling.
The fully integrated IoT platform offers countless features in running and scaling your application. Create your application in the integrated development environment Studio with the help of libraries and practical examples.
Machland Dam & Inteso
At the 36-kilometre-long Machland Dam, the groundwater level is monitored remotely. Thanks to the monitoring system, the level can be queried from the control centre. When a limit value is exceeded, there is an automatic alarm.
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
Mit dem Laden des Videos akzeptieren Sie die Datenschutzerklärung von YouTube.
Mehr erfahren
UTK – EcoSens GmbH Zeitz
Photovoltaic systems are monitored throughout Germany. In the event of a fault, a quick, automatic alarm provides information.
With the help of the runtime calculator, you can estimate the autonomous runtime of the application as well as the costs incurred. The actual costs and energy consumption depend on the measurement conditions, such as the reception quality and ambient temperature. Detailed information on the tariffs can be found here.
| myDatalogEASY IoTmini | |
|---|---|
| Item no. | 301201 2G/M1/NB1 World |
| Inputs | 4 x analogue or digital and 4x BLE sensors (feature activation) |
| Input configuration |
|
| Measuring range / resolution |
|
| Sensor supply |
|
| Temperature sensor | Input 1x PT100/1000 |
| Internal sensors and measured values |
|
| Serial interfaces, bus interfaces |
|
| Outputs | 1x potential-free switching contact |
| Power supply |
|
| Battery life time | Battery life up to 5 years Rechargeable battery life up to 2 years |
| Protection class | IP66 |
| Display | RGB-LED |
| Dimensions | 86 x 175 x 64mm (without antenna) |
| Data transmission | 2G/M1/NB1 World |
| Name | Hardware Version | Document Category | Revision | |
|---|---|---|---|---|
| Fact Sheet myDatalogEASY IoTmini 2G/M1/NB1 World | from Hw 1.1 | Fact Sheet | 01 | |
| Manual myDatalogEASY IoTmini | from Hw 1.1 | Manual | 02 | |
| EU Declaration of Conformity myDatalogEASY IoT/IoTmini 2G/M1/NB1 World | from Hw 1.0 from Hw 1.1 |
EU Declaration of Conformity | 19.06.2023 | |
| 3D View myDatalogEASY IoTmini | from Hw 1.1 | 3D View | Hw 1.1 |
| Producttitle | myDatalogEASY IoTmini |
|---|---|
| Item no. | myDatalogEASY-mini |
| Power supply | Battery, rechargeable battery or direct power supply |
| Data memory | 3MB internal flash memory |
| Programming | In Studio with C-like scripting language built on PAWN |
| Dimensions | 86 x 175 x 64mm (without antenna) |
| Protection class | IP68 (plugged) / IP66 (unplugged) |
| Operating temperature | -20...+60°C |
| Inputs | 4 x analogue or digital
|
| Measurement range |
|
| Temperature sensor | 1 x PT100/1000 with auto detection(Additional costs will be incurred to release these features.) |
| Outputs | 1x isolated switch contact 2 x switchable 3,3V supply (max. 180mA ) 1 x switchable and adjustable sensor supply (5...24V ) |
| Serial interfaces | 1 x RS232 (optional) 1 x RS485 (optional) |
| Data transmission |
|
| SIM |
|
| Positioning |
|
| base price | - |
To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
Microtronics Engineering GmbH
Hauptstrasse 7
3244 Ruprechtshofen
Austria
Tell us about your application.
We will be happy to assemble the device according to your requirements.
To load the content, please click on the button. By doing so, you agree to the loading of HubSpot cookies. You can find out more in our privacy policy.
In order to use our live chat, you must agree to the loading of Hubspot cookies. You can find out more about this in our privacy policy.
