Loading...

myDatasensH2S
H2S Measurement

The best solution to effectively measure and monitor H2S - even online and in ATEX Zone 1!

What we offer

  • Measuring and monitoring of H2S
  • Data recording without data holes
  • Operating life of at least 24 months
  • Fast and efficient sensor replacement
  • Cheap replacement parts
  • Economical handling of ressources
  • Robust Devices
  • Combination with automatic Dosing control possible

Battle against bad odour, corrosion and health defects

Innovative sensor replacement

Remove the old H2S sensor, insert the new. Data recording without interruptions by an immediate sensor replacement at the measurement site.

ATEX certified

Suitable for application in explosion-prone environments (Zone 1 and 2).

Colour display & robustes design

Curent measurement values can be read from the colour display. The myDatasensH2S is appropriate for application in rough environments thanks to its chemical-resistant IP66 protective rubber armour.

Mobile data transmission

Using the data transmittion via Bluetooth or 3G, opening the manhole is not necessary. Via 3G, the data gets directly delivered to your office.

Ultra Low Power

The established Microtronics Ultra Low Power technology enables the BLE Gateways to have battery lifes of up to 36 months.

Ecodesign

From the product development to the availability of cheap replacement parts to the disposal of the battery and sensor, the Ecodesign Directive is considered.

GasBuster App

The GasBuster app communicates via BLE with all H2S sensors within reach. The app shows the current measurement values (gas value and temperature).

Via the GSM connection of your smartphone, you synchronise the data with your server. In this case, the timeliness of your data on the server is dependent on the visit frequency of the measurement site.

The 3 myDatasensH2S measurement variations

H2S Local

  • Measure comfortably via Bluetooth (BLE)
  • Get data without opening the manhole cover
  • Save the data to local data storage
  • Evaluate data cheap and fast on site

H2S Connected

  • Get data without opening the manhole cover
  • Data transmission via Bluetooth (BLE) to the smartphone
  • Send measurement data to the server via the smartphone
  • GasBuster App for wireless communication in the sewer

H2S Complete

  • No travel to the measurement site necessary for getting data
  • Data transmission via mobile radio to the server
  • Current data conveniently available in the office via web browser
  • Structured data storage

Enable your access to the free information series via E-Mail!

I accept the Privacy Policy.*

Thank you for signing up and have fun with the information series.
You have already received the first part, of the twofold information series, by e-mail.

BLE mA Link - Dosiersteuerung

Dosing control with the BLE mA Link

The BLE mA Link is an add-on for the myDatasensH2S. The BLE Gateway transmits the data via BLE to the BLE mA Link.

Thus a pump is automatically driven for the reduction of the gas concentration in the surroundings of the sensor. In addition to implementing a dosing control you can display the H2S measurement value on site or pass it on to a PLC.

Your H2S partner is always nearby

Address

Hauptstrasse 7
3244 Ruprechtshofen, Austria

Telephone

+43 2756 77180

Contact us now!

I want to be a step ahead of the bad odour with the H2S newsletter!
I accept the Privacy Policy.*

Thank you for signing up and have fun with the information series.
You have already received the first part, of the twofold information series, by e-mail.

Thank you for your message. We will contact you as soon as possible!